1/6/2024 0 Comments Flux capacitorTo change the LED state, while in Settings Mode, hold the "Start/Set" button. For each of the 4 combinations LEDs light up at 25%, 50%, 75% or 100%.Īll of the combinations, and setting examğles are shown in the tables below. LEDs numbered 7 and 8 displays the setting for LED brightness. For each combination LEDs animate very slow, slow, fast or very fast. LEDs numbered 5 and 6 displays the setting for animation speed. With one LED you get only 2 combination either on or off. LED number 4 displays setting for flashing animation which animates when you press "Start/Set" button in normal operation. If you set those LEDs to different on/off states, you get 8 total combinations and on each set combination LEDs animate in different patterns. Now the combinations of the LEDs numbered 3, 2, and 1 sets your main animation. If it's fully lit then it is shows "on state or in binary 1" and if it's very dimly lit then it is shows "off state or 0 in binary". LEDs are numbered as shown in the photo below to represent a setting for each LED. LEDs on each row of all columns, starting from outer to inner are paralleled. Some of the LEDs should be on at full brightness and some very dimly lit (so you can see them through FR4 diffuser) according to the configuration it was set. ![]() You can release both buttons when you see all the LEDs start to light up one by one. While holding the “Start/Set” button on the back turn the Flux Capacitor on by holing "On/Off" button for 3 seconds. In order to do that, first you have to turn off your Flux Capacitor (if it's on) by holding "On/Off" button for 3 seconds (you always have to hold the "On/Off" button for 3 seconds to turn it on or off). To set your desired animation, speed and LED brightness, you have to start flux condenser in Settings Mode. There are 8 animations, 4 animation speeds, 4 LED brightness levels (100%, 75%, 50% and 25%). In settings mode, users are able change the animation type, speed, and LED brightness. By using PWM (Pulse Width Modulation) pins for 8 channels of 3 paralleled LEDs, different animation patterns are generated for the fluxxxing effect. This mini Flux Capacitor is controlled by a Microchip ATtiny816 microcontroller. It’s 100% decorative, it doesn’t actually let you travel through time. Featuring 24 LEDs, diffused through bare FR4 material, that animate to create the “fluxxing” effect. It is constructed with high quality 3D printed frame, sandwiched between stacked Gold Plated PCBs. Measuring at only 48mm x 38mm (1.89in x 1.5in), it can be easily pocketable. Thank you O'Reilly Auto Parts for this fun not available item.MORE BLACK CASES ARE BACK IN STOCK WHAT IS IT?Ī miniature version of Flux Capacitor from the movie trilogy Back to the Future. Non-Functional Item Displayed For Entertainment Purposes Only Once the DeLorean reaches the optimal speed of 88 mph (142 km/h), light coming from the flux capacitor pulses faster until it becomes a steady stream of light.Flux Capacitor requires the stainless steel body of the 1981-1983 DeLorean DMC-12, V6 2.9L, to properly function.Plutonium is not available at Denoyer-Geppert.Plutonium is used by the on-board nuclear reactor which then powers the Flux Capacitor to provide the needed 1.21 Gigawatts of Electrical Power.Plutonium is required to properly operate Flux Capacitor. Time moves slower (think Matrix Movies) or spin around fast and throw yourself down, close your eyes and everything is slo-mo. ![]() The great 20th century scientist Albert Einstein developed a theory called Special Relativity - "Electrodynamics of Moving Bodies" YES Time travel! If Albert Einstein believed in it - why cant we? Non-Functional Item Displayed For Entertainment Purposes Only Thank you O'Reilly Auto Parts for this fun not available item.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |